pyronix enforcer

Hi I just moved into a new place with an existing Pyronix Enforcer with a deltabell sounder from 2013. It hadn't been used for a while so I changed the batteries in the sounder and all the door sensors and PIRs but I am still getting a low battery error on the control panel which lists all the...

Hi I have a pyronix enforcer V10 for more than 5 years. Recently the contract panel showing alram as: Control Panel COMM Fault. Is there any body here whi can advise how it can be resolved and cleared this? What issue may causing this alarm? Any feedback, much appreciated.

Hi Everyone, Looking for a pro alarm install with self monitoring and optional annual maintenance contract to replace an existing alarm. But the choice is not easy. Quotes provided offer three options: 1. Pyronix Enforcer 2. Pyronix Euro46 3. HKC 10270 My requirement: Wireless: - 2 Door...

Hi can anyone help, had our front door replaced, door contact was pulled off which triggered a tamper. Tapped in code to cancel the sounding alarm. The door contact was fitted back to the new door as it was, however we are left with a yellow warning flashing on the panel and can’t get rid of...

I've installed a Pyronix main panel and 6 wireless PIRs. I won't be using an external bell for the time being although I'll probably use more of its features later. I'm left with some resistors but the various literature doesn't give any hints. I presume they are to balance wired connections...

Hi everyone, I am currently getting some renovations done to my house so the builders took down the PIR sensors. Since then I get constant errors on tampers etc so I haven't been able to use it. They are now ready to put it all back again but have managed to lose the back plate on one of the...

I have installed the alarm. The alarm sets fine when I present the fob and leave via the final exit door. but when I present the fob and go upstairs to bed the alarm sounder goes off. I have no pir’s upstairs Front door set as type 7 Back doors set as type 8 Pir’s are set as type 9 I think...

I've had a Pyronix Enforcer alarm for 2.5 years. It's been OK in that time, but recently the external siren would go off, even when the alarm was not set. There has been no changes to any settings or device. The control panel log reports two things: - Tamper Alarm - Wirls Tamp Restr This...

I self installed (with a little help from sparky on here) a pyronix enforcer wireless alarm. up until last week the panel was plugged into the mains via a plug and it had been working absolutely fine. Last week i got an electrician to hardwire it to the mains. It was working fine for a couple...

I am having a problem with my mother’s alarm system (Pyronix Enforcer). Before going any further I need to clarify that this is an exceptional situation due to the Coronavirus lockdown, that I would, under normal circumstances, get sorted out in a heart beat by simply calling an engineer in...

I have got an issue with the siren outside the house, which has started triggering a "tamper" alert which is quite deafening. Currently waiting for the electrician to look into that, but in the meantime trying to reduce or stop it altogether. Been into engineer mode, but am unable to find the...

How do I replace the battery in my Pyronix Enforcer keypad? The person who installed it for me has been coming to replace the battery for several weeks so I’ve decided to do it myself Many thanks for any advice !!

Hi folks, I have a friend with an Pyronix Euro 46 panel connected to Pyronix cloud through a small alarm company. He wants to take control of the panel himself but the company refuse to release the system from their cloud account as he is under contract. I have a fair amount of experience...

Hi, I have a Pyronix Enforcer system installed in my flat. Recently I have had a few faults come up, mostly about low batteries, and that’s fine, I can set about getting the batteries changed. My problem is that when those alerts come up, it causes a repetitive double beep from my control...

My Pyronix Enforcer panel a few days ago started to make an alert sound whenever I try to set the alarm using the key fobs; the key fob flashes amber, the normal 30 secs alarm arming beep sequence gets interrupted just after a few seconds and the alarm doesn't set. I checked the alert in the...

Hi all, First time I've undertaken fitting an alarm panel but I'm usually pretty good with these sorts of tasks. I've got the enforcer v10 panel and 5 PIR's with a wireless delta Bell outside. Pretty simple in terms of systems. I've linked everything up, added the users with the key fobs and...

Hi team, I’m a fire alarm engineer and have tried to branch into a bit of security stuff in my own house. So far it’s not going brilliantly. I’ve installed a wireless pyronix enforcer kit. Delta bell/4 pirs/1 door contact/1 wireless keypad and a couple of remote fobs. Install went well. But...

Hi folks, The house I've lived in for a year has a Pyronix Enforcer 10 and during the last week it has sounded when unset at random times. Last Thursday it went off twice in the evening, showing a tamper with areas A, B and C all affected. After a quiet weekend, it has gone off 6 times in the...

I see a lot of people with experience of these panels. I have just installed the panel and am trying to connect to my wifi network. Neither of the two methods noted are working for me. I have tried entering the SSID and password manually. I also used the other method that uses a smartphone. The...

Hi all. I’m looking for some help installing a door sensor for a Pyronix Enforcer and would be grateful for any advice. I set up this system about 4 years ago and have not had any issues. Now I’ve tried installing a door contact and when ever the door is opened, the siren sounds. This...