Hi
I have just installed a texecom Elite 48 system with a Com 2400 for receiving sms messages & a Com IP for accessing it via the internet/ mobile app, but I am having problems.
The first is that the com 2400 will not text my mobile all it will do is ring my mobile, bt have said that my line is set up for sending text messages but I have no way of testing this. I have played about with wintex but with no luck, all I want it to do is text me if the alarm goes off so I can the access it via my mobile app.
That is the next problem I cannot get the com IP to get online all I have are 2 LEDs showing that I am offline & not being recognised on my local network.
I have set up the IP addresses shown below but with still no luck.
Onboard digi com: com2400
Com port 1: Com IP
Com port 2: Not used (used Com usb to connect pc)
Com IP Details
Local IP Address: 192.168.2.20
Local IP Port: 10001
Gateway: 192.168.2.1
Subnet mask: 255.255.255.0
Thanks
I have just installed a texecom Elite 48 system with a Com 2400 for receiving sms messages & a Com IP for accessing it via the internet/ mobile app, but I am having problems.
The first is that the com 2400 will not text my mobile all it will do is ring my mobile, bt have said that my line is set up for sending text messages but I have no way of testing this. I have played about with wintex but with no luck, all I want it to do is text me if the alarm goes off so I can the access it via my mobile app.
That is the next problem I cannot get the com IP to get online all I have are 2 LEDs showing that I am offline & not being recognised on my local network.
I have set up the IP addresses shown below but with still no luck.
Onboard digi com: com2400
Com port 1: Com IP
Com port 2: Not used (used Com usb to connect pc)
Com IP Details
Local IP Address: 192.168.2.20
Local IP Port: 10001
Gateway: 192.168.2.1
Subnet mask: 255.255.255.0
Thanks