Panel back up battery sounds most likely.
No power to panel external beep should ring for 15 minutes and then stop (modern bell boxes).
With no battery but mains power panel can behave contrary to expectations.
A rough guide is main panel battery replace every 5 years.
What DVR do you have?
You should be able to call each camera with a http:// command line using the IP address of the camera and the channel along with a password and username.
There is a site with a whole list of these command lines but cant remember its name at the minute.
Wirelessly the slimer products for many manufacturers can hide in some frames easily.
Texecom Micro, Orisec covert, Pyronix nano, but you need to check their dimensions as it can vary from window to window and door to door.
You can get flush mounted hard wired products but requires you to sink...
The smart com connects to the internet and connects to the Texecom Cloud Servers.
The App then connects to the Cloud.
Connection types:-
1 wifi (standard CEL-0001 and 4G CEL-0007)
2. Ethernet cable (standard CEL-0001 and 4G CEL-0007)
3. GPRS (4G smart com CEL-0007)
There are plans to change...
Are these details in the pane?
It sounds like the Texecom Monitor mode is on, Thid needs the programming off.
Then program ofg for the smart com and connect and then tirning it back on in the order specified in the manual at the keypad is probably easiest after the Texecom Monitor mode is...
hard to trouble shoot when your not there to try things out.
but a version 3 should be fine and should be upgradeable to latest version of the smart com.
If your on the latest version of the alarm panel 6.x , disable texecom monitor and disable texecom connect in ful and reset up Texecom connect.
Version 1 smart coms released and the users could login and update the smart com, Texecom pushed out to all smart coms connected the updates more than once before they could no longer be updated.
So all my customers were updated periodically so they should be on the latest versions.
If your...
See so many selling on eBay with stuff that won’t work claiming is new.
No carrier can be however related to setup issues, but usually means it can’t see the internet connection, ie nothing to cart the information on.
Which version of the app are you on?
The Texecom cloud is probably the easiest way to update the smart com and panel firmware.
The location text doesn’t need filling, should stop comming up at some point regardless after partially setting up.
E/E are in several places spending on what you...
Lots of things don’t work properly if they don’t have the text assigned to them,
Think done of this has been documented on here before specifically areas, things keep changing though.
Zones in use should have text, areas should have text and so on.