Recent content by Riffssco

So just to come back to this in case it's helpful for someone else. I eventually managed to get access to the master code and for some reason, although i only had 2 fobs there were 5 users set up as fobs. I'm not sure if what looked like pairing mode on the fobs was actually some kind of error...

brilliant - I have now managed to get all the codes changed and the system working properly. I appreciate all the advice and insight from everyone on here. thanks

that's worked I've now been able to change the engineer code. Thanks. I have come up against my next challenge. I couldn't change the master code in the engineer menu and I understand I need the master code to add a keyfob. Is there any way around that without having the master code?

Thanks. I have managed to back door in but once i do that i still don't have the option to change the engineer code for some reason. The only option when i enter the change code menu is to allow 5 digit codes or not.

I'm thinking 10 secs per try so I can get through about 60 tries in a 10 minute session and about 3 sessions a day so probably around 2 months to get through all 10,000 permutations. Not fun but also doable if it doesn't set off the alarm after too many wrong tries

Hi - just coming back to this after trying a few things. Does anyone know if there's a limit to how many incorrect codes you can enter? I'm considering working through every 4 digit permutation until I eventually find the engineer code but don't want to set off the alarm if it triggers it after...

The ones you have to take apart

Would changing the batteries cause it? Otherwise I'm guessing I've managed to do it when trying to get it to respond. In assuming the flashing red and green light is probably it in pairing mode?

Thanks. I tried that but didn't seen to make a difference. I had thought if it was locked no lights came on until it was unlocked?

Even though I probably can't fix it, does it sound like the fobs have been forgotten from the system and need re-added?

Thanks - I don't get that option to edit users with the code I have.

Hi I have 2 x KF4-WE fobs for a system that was already installed in my new home which don't seem to be working. On fob 1 When I press the set or unset or I buttons there seems to be no response on the fob or the control panel. When I press button II the fob lights up green for a moment but...

thanks got the chime off now. for the date and time - the only code I have doesn't give a change date and time option in the menu. I can only change user code, do walk test, test siren and review logs

So the walk test didn't do anything. i.e. it didn't register any of the inputs but I did manage to pull the power and battery and the system seems to be working now. I have 2 new problems though. 1. I don't have an option to set the date and time to the correct settings. 2. the control panel...

If it worked what would it be expected to do? should it clear the errors but leave everything else intact or would it reset the codes too?