Does anyone recognise this hinge?
View media item 97747
It's from one of these screens:
http://www.ebay.co.uk/itm/1000mm-Fo...hroom-Panel-/370935797297?hash=item565d7f1631
I didn't get the screen from ebay - bought it new and boxed from a chap on gumtree as an interim improvement in our bathroom until we re-do the entire room.
However despite all images on the box and instructions showing a screen fitted on the right hand side of the bath what I have is a lefty (as per the ebay listing). This wouldn't be an issue if it could fold back over the bath but it hits the tap at about 45 degrees so I really need it to fold outside the bath.
So I need to undo the two hinges that join the piece of glass that's fixed to the wall and the first hinged section so I can flip that section relative to the others. I can't flip the entire screen as the first piece of glass is 15mm taller (at the base) than the subsequent panels - as shown below:
View media item 97748
Anyway I'm struggling to get the hinge covers removed - I'm assuming they're a keyhole or slot fixing that you push one way then lift off as the metal cap shown is seamless with no grub screws etc. but they feel pretty solid and I haven't attacked them with a vengeance yet as I don't want to damage them - I'd rather act on more information!
Anyone got any ideas?
Cheers!
View media item 97747
It's from one of these screens:
http://www.ebay.co.uk/itm/1000mm-Fo...hroom-Panel-/370935797297?hash=item565d7f1631
I didn't get the screen from ebay - bought it new and boxed from a chap on gumtree as an interim improvement in our bathroom until we re-do the entire room.
However despite all images on the box and instructions showing a screen fitted on the right hand side of the bath what I have is a lefty (as per the ebay listing). This wouldn't be an issue if it could fold back over the bath but it hits the tap at about 45 degrees so I really need it to fold outside the bath.
So I need to undo the two hinges that join the piece of glass that's fixed to the wall and the first hinged section so I can flip that section relative to the others. I can't flip the entire screen as the first piece of glass is 15mm taller (at the base) than the subsequent panels - as shown below:
View media item 97748
Anyway I'm struggling to get the hinge covers removed - I'm assuming they're a keyhole or slot fixing that you push one way then lift off as the metal cap shown is seamless with no grub screws etc. but they feel pretty solid and I haven't attacked them with a vengeance yet as I don't want to damage them - I'd rather act on more information!
Anyone got any ideas?
Cheers!
Links in this post may contain affiliate links for which DIYnot may be compensated.