Run off from patio

Joined
22 Apr 2024
Messages
4
Reaction score
0
Country
United Kingdom
Hi All

First time I’ve posted on this site, I’m looking for some advice to remove this build up from the blue engineering bricks it appears to be run off from the patio this has developed over the past 18 months it is solid to the touch, so far I’ve tried hot steam pressure washer (no effect) and hydrochloric acid 17% strength, the acid fizzed but had no effect either. Any advice would be appreciated .
 

Attachments

  • image.jpg
    image.jpg
    561.8 KB · Views: 37
  • image.jpg
    image.jpg
    741.6 KB · Views: 34
  • image.jpg
    image.jpg
    574.1 KB · Views: 35
Sponsored Links
Might be lime run off from the paving slabs, what are they made of? Are they laid with an overhang drip?

Water will not wash it off.

Try brushing it off dry if it ever gets powdery.
 
hi John
It is definitely run off, they are laid with a overhang however the damage is where the gaps in the flags are grouted, it is too hard brush off and I’ve tried a hot water power wash 120c but it doesn’t budge
 
Sponsored Links
It was the brush in type
 

Attachments

  • image.jpg
    image.jpg
    264.6 KB · Views: 11
our garden walls were cleaned up when they did the block patio with a pressure washer (but a petrol high powered unit) - My karcher doesnt touch it
the difference is like chalk and cheese - really got all the muck of the bricks from years and years of buildup

brilliant result - i'll try and find photo of old v new
Had to repoint some of it
 
If it fizzed with the brick acid, then you need to continue with that, use a stainless steel wire brush to agitate the surface, and it will eventually clear.
 
Hi Mike
I was concerned I’d do more damage to the mortar joints before the actual soiling is removed
 
use an old paintbrush to put it only on the brick faces, when depleted it will not attack the mortar much at all.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top