Opening a roller blind mechanism

N

noobiediyer

Joined
27 Mar 2011
Messages
146
Reaction score
0
Location
Buckinghamshire
Country
United Kingdom
I wish to replace the chain in my 38mm blind roller for a continous chain type. I've taken off the clutch/mechanism on the side but I cannot figure out how to do it. It should be as easy as this YouTube video shows but the two prongs that the video shows can be pinched, on my one it does not move at all. There is a round hollow cylinder which looks like it is a pin that prevents it but it won't budge.

Is anyone able to help me to work out how I do this? I'm attaching photos of the mechanism:

Blind mechanism 1.jpgBlind mechanism 2.jpgBlind mechanism 3.jpgBlind mechanism 4.jpgBlind mechanism 5.jpgBlind mechanism 6.jpg

(Alternatively, I've seen replacement 38mm clutches that seem to allow far easier disassembly such as this one: https://www.amazon.co.uk/hocadon-Bracket-Fittings-Curtain-Brackets/dp/B09HZ377V3 )
 
Sponsored Links
The video is for a different blind, on yours you would need to remove the pin possibly destroying it. Why are you attempting such a pointless task? Continuous chains are not longer used due to the choking hazard it presents. Replacement gears are widely available but again for use with safety chains.
 
Sponsored Links
foxhole said:
The video is for a different blind, on yours you would need to remove the pin possibly destroying it. Why are you attempting such a pointless task? Continuous chains are not longer used due to the choking hazard it presents. Replacement gears are widely available but again for use with safety chains.
Click to expand...
I'll try to be careful not to choke on it then :LOL:

It'd be nice if people are able to help without judgy comments like:
"What's wrong with the blind?"
"Why are you attempting such a pointless task?"

If there is anyone who can help without judgement then that would be very much appreciated.

I'm happy to drill out the pin if there's no easy way to remove it.
 
noobiediyer said:
I'll try to be careful not to choke on it then :LOL:

It'd be nice if people are able to help without judgy comments like:
"What's wrong with the blind?"
"Why are you attempting such a pointless task?"

If there is anyone who can help without judgement then that would be very much appreciated.

I'm happy to drill out the pin if there's no easy way to remove it.
Click to expand...
The hazard is to small children but I guess you qualify .Good luck with your pointless task .
 
foxhole said:
The hazard is to small children but I guess you qualify .Good luck with your pointless task .
Click to expand...

I'm well aware of the choking hazard to children on blind cords but I don't feel the need to justify why this isn't an issue in my setup.

It's a bit pointless you bothering to post if you're not going to be helpful. Would you rather save your time by just not bothering to post at all.

I'll take my request to some other forum that will be more helpful.
 
So is the problem that the drop of the blind is a longer length than the chain that has come with the bind, as if that is the case then I would suggest you have been supplied with the wrong fitting and need one with a longer chain.
 
jj4091 said:
So is the problem that the drop of the blind is a longer length than the chain that has come with the bind, as if that is the case then I would suggest you have been supplied with the wrong fitting and need one with a longer chain.
Click to expand...

For the second time, there is nothing wrong with the blind. I want to fit a contininous bead chain without it having a join. I can fit it to the existing clutch mechanism if I can get access to the cog, but I can't figure it out hence this post.
 
jj4091 said:
So is the problem that the drop of the blind is a longer length than the chain that has come with the bind, as if that is the case then I would suggest you have been supplied with the wrong fitting and need one with a longer chain.
Click to expand...
I would give up to make sense of the noob.
 
Thanks for the valuable lesson everyone: if you need helpful and non-judgemental advice, diynot.com is not the place to post.
 
D

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.
Sponsored Links

Similar threads

H
Roller blind clutch mechanism assembly problem
Replies
4
Views
3K
foxhole
foxhole
M
Roller blind removal
Replies
11
Views
4K
mandyspangles
M
Diyisfun
Remove a roller blind
Replies
6
Views
65K
c j
C
H
Re-inserting a continuous roller blind chain
Replies
1
Views
2K
hounslowluddite
H
Back
Top