Cooker Hood No Power

Joined
10 Dec 2023
Messages
64
Reaction score
7
Country
United Kingdom
Hi All

My cooker hood hasn't worked since moving into my place and I can't seem to work out why...

I've attached some pictures of the current setup of it. Three pictures are of the inside of the hood and also the grey wire that leads through the wall to the other side (the room with the ducting).

In terms of the pictures of the room with the ducting, there's an extraction fan / ducting on the wall in the room that backs onto the cooker hood. The switch in the picture closest to the ducting manually turns on a fan (ducting). I'm not sure what the socket further up closer to the ceiling does (or if either of those are even related to the cooker hood). I have just shown them as they're on the wall the extraction fan leads to and at least one controls a fan or some sort there.

Would anyone be able to point me in the right direction to diagnosing the issue & fixing it?

In terms of equipment, I have a Two Pole Voltage and Continuity Tester and can get other bits if needed.

Thanks!
 

Attachments

  • 20240506_180618.jpg
    20240506_180618.jpg
    321.4 KB · Views: 56
  • 20240506_180642.jpg
    20240506_180642.jpg
    232.5 KB · Views: 56
  • 20240506_180623.jpg
    20240506_180623.jpg
    276.2 KB · Views: 56
  • 20240506_180647.jpg
    20240506_180647.jpg
    280.5 KB · Views: 46
  • IMG_20230411_205927.jpg
    IMG_20230411_205927.jpg
    195.9 KB · Views: 40
  • IMG_20230411_205535.jpg
    IMG_20230411_205535.jpg
    115.7 KB · Views: 50
Sponsored Links
1st thing would be to check you are getting a voltage from the source
The switch in the picture closest to the ducting manually turns on a fan (ducting).
So the extractor fan works OK from that switch ???

Make and model of the extractor hood - looks like an IKEA model
can you show a photo of it in postiion and type
HOO C10 S

that model comes up on all sorts of website suppliers and parts

Do you have a mulitmeter ?
 
1st thing would be to check you are getting a voltage from the source

So the extractor fan works OK from that switch ???

Make and model of the extractor hood - looks like an IKEA model
can you show a photo of it in postiion and type
HOO C10 S

that model comes up on all sorts of website suppliers and parts

Do you have a mulitmeter ?
So in terms of that switch when I turn it on, it makes a fan noise, but that doesn't turn on the cooker hood, which I presume has no power!

I've attached a picture of the cooker hood head on!

I have a two pole voltage and continuity tester coming tomorrow.
 

Attachments

  • 20240506_184942.jpg
    20240506_184942.jpg
    406 KB · Views: 18
Last edited:
what controls are on the hood itself
looked at a few manuals for the HOO C10 S
is the motor and I assume thats the blue plug we can see on one of the images
and thats NOT the motor/fan you can hear start up

also shown here under IKEA heading , but still whirlpool

where do the wires from that BLUE connector go to ?
Be careful as it could be LIVE
 
Sponsored Links
what controls are on the hood itself
looked at a few manuals for the HOO C10 S
is the motor and I assume thats the blue plug we can see on one of the images
and thats NOT the motor/fan you can hear start up

also shown here under IKEA heading , but still whirlpool

where do the wires from that BLUE connector go to ?
Be careful as it could be LIVE
I've places a picture of the cooker hood controls here.

Nope, when the fan goes off it certainly doesn't appear to be that! The fan itself is within the duct (where the arrow on the picture I've attached is).

In terms of the connector, this appears to go into the motor connector and then presumably into the wall behind. I'm unsure if the grey wire shown by the cooker hood is any of the two grey wires on the other side (duct side).
 

Attachments

  • 20240506_180618.jpg
    20240506_180618.jpg
    323.6 KB · Views: 27
  • 20240506_191045.jpg
    20240506_191045.jpg
    298.3 KB · Views: 32
Some muppets conceal the fused spur in the chimney of the cooker hood so you might have to take the chimney off to find it
 
Is that two fans in line, one in the hood itself and one in the duct to the outside? Why would you do that?
 
do you have a mulitmeter and know how to use - so you can check the power going to the hood
In terms of the connector, this appears to go into the motor connector and then presumably into the wall behind. I'm unsure if the grey wire shown by the cooker hood is any of the two grey wires on the other side (duct side).
looks more like it goes to the control switches , and then a cable comes down to the motor - difficult to see exactly - BUT you would need to see where that greyish wire goes - IF not to the switches - THEN where does it get power from - i have only dealt with 2 hoods , other than my own for people and often conencted to the lighting circuits , one via a spur , others directly
BUT I'm just a DIYer NOT trade
 
Some muppets conceal the fused spur in the chimney of the cooker hood so you might have to take the chimney off to find it
So I've taken the chimney off and can see a fused socket up there! Picture attached...
 

Attachments

  • 20240507_172423.jpg
    20240507_172423.jpg
    254.4 KB · Views: 20
do you have a mulitmeter and know how to use - so you can check the power going to the hood

looks more like it goes to the control switches , and then a cable comes down to the motor - difficult to see exactly - BUT you would need to see where that greyish wire goes - IF not to the switches - THEN where does it get power from - i have only dealt with 2 hoods , other than my own for people and often conencted to the lighting circuits , one via a spur , others directly
BUT I'm just a DIYer NOT trade
I have a two pole voltage & vontinuity tester. The greyish wire goes into a fused switch which I found once I removed the chimney!

Picture attached.
 

Attachments

  • 20240507_172423.jpg
    20240507_172423.jpg
    254.4 KB · Views: 9
ok, so first thing would be to remove the fuse and see if its blown , that switch is ON , unless wired up wrongly
I've removed it and put my continuity tester on each side of it and it's making zero noise... I'm presuming this means it's blown?

It's a 5a - would it be worth replacing like for like, or with a different amp fuse?
 

Attachments

  • 20240507_180208.jpg
    20240507_180208.jpg
    216.9 KB · Views: 8
like for like
i would expect that to blow if a problem with the hood
so have a spare one
Thanks - I'll get a few spares! I keep seeing online in general that most people put a 3a in... is there any advantage if this over the 5a and vice versa?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top