Hi All.
I had a gas engineer come out to quote for a new piece of work.
The requirement is as follows.
6 showers
11 radiators
300L unvented cylinder
12sqm of single zone underfloor underfloor heating
The engineer estimated a 30kw system boiler, not sure if this is an overkill or about right...
Hi All.
Got this old wardrobe, would like to paint it as thesame colour as the wall, the wall paint can be used on wood also. My question is, can I just use a roller to apply the paint. The stain on the wardrobe doesn't appear to be oily as its an old wardrobe made of oak and extremely heavy...
Thanks for the comments, as the planks are already laid, how can I do this without removing them all over ? I am looking for a solution that will not involve removing the laid planks, the skirting is on top already.
I did this myself with the help of a mate, Its click flooring, what can I do now when the frames were not undercut ?
Can I cut a bit of wood /scotia trimming and nail/glue to the frame, paint same colour as the skirting ?
Does LVT require expansion ?
Hi,
Installed LVT on concrete subbase, as I did not want to remove the door frames etc, I have ended up in a situation where there are gaps between the floor and the corners.
Thanks in advance.
Please see the attached pictures, when I open the large braided coiled connector the boiler fills. I am not sure if the integral filling loop is open or closed as per the attached pictures.
Thanks everyone for the input.
Just to be sure, please see the picture below.
I have labelled the valves 1,2,3 and what suprised me today is that I went outside by the drain cock to open it in order to reduce the pressure, I then opened the silver braided valve above this text and the...
Thanks for this insight.
I had to rush home last night as it would not stop.
This is what it looks like, and I like to think that the 2 filling valves are in the closed position (the blue and black)
I closed this loop and the whole thing stopped.
Hi All.
I have an ideal logic 24 combi boiler, recently I have noticed that the overflow pipe starts to gush out a lot of water at regular intervals and the boiler is vibrating a lot when the water is being discharged.
I noticed this 2 weeks ago, the pressure refill valve is in the closed...
Thanks for this piece of valuable info, it is highly un likely that all the showers will be in use at thesame time, what may be used randomly is the kitchen tap as this could vary, the use of the shower will be at different times of the day.
Is it possible to restrict flow onto a shower and if...
Hello Everyone
Just going through the design of a house with 3 showers, no bath. We are proposing to use a Vaillant 938 as there is no space for a cylinder unless we create an extension for the cylinder.
The flow rate is 20L per minute from the kitchen tap, does anyone know if Vaillant 938 is...
Hi All.
What happened with the mortgage company is that they saw the report from the damp company, and insisted that the works had to be done before they could release the loan.
I have taken some more pictures.
Here we can see the build up of algae ont he floor which suggests that the water...