Recent content by Novril

I've just emailed the 4 files to your offers email address from your bio. Hopefully that works!

I've sent you my config file as a pdf secureiam, I hope that will do. It wouldn't let me attach anything else via Pm.

Thank you, I'll have a go with wintex this afternoon and report back.

I haven't checked programming via the keypad, but will do tomorrow. I updated the panel to latest firmware (v6. 05.03 ls1) and smart com was already on latest version (v4. 05.01) Ive named the area now. So will try changing the hallway to reset the defaults as guard access and see if that helps.

I'm programming via the Texecom cloud website on my phone. Seems to work pretty well, just some options are laid out differently. One thing I haven't done is named the Area (all on A) which I have seen can cause issues on some older forum posts. No other sensors can pick me up in the...

No, it's main group is guard access. Guard not ticked in the attributes. The other pirs are main group guard, but also not tucked guard in attributes in case that helps.

I've tried to only 'adjust' settings as needed to function as intended, rather than tinkering. I the area settings I've seen a lot more options for things, but nothing jumps out as part arm relevant. I regards to hallway pir, I'm assuming double knock is the best solution to the wireless...

Either swipe prox tag or enter code. Press the house with a man in the middle which selects part set 1 called night time. Then the tick to arm. It beeps for 8 seconds and then says set. I wait a minute on the stairs, part arm notification comes through instantly on the app. Then walk down to...

I've changed hallway to part omit 1. Alarm no longer triggers and when front door is opened it beeps for the entry timer. I've done another walk test and all sensors register in correct places. It just doesn't want to use this hallway one as the access sensor by the look of it. I'll see if I...

Once set to not used and back to guard access, the only thing it added was entry/exit 2. Which didn't have any effect. I can either walk to it and disarm via keypad by the double knock delay, or trigger the alarm.

Okay I've just removed double knock from the hallway pir. Despite being on guard access and having access ticked. As soon as I came downstairs it triggers the alarm. So it probably isn't giving me entry tones because the only delay on it was the double knock. I'll try what you suggested and...

Sorry for the delay, I haven't had a chance to test it until now. I have left it a minute or 2 after a part set confirmation, I can see from a mirror the keypad flashes displaying part set continually once set. When I approach the keypad I don't get any warning sounds, just sets the alarm off...

I set part arm 1. Went upstairs, gave it a minute or 2 and then came back down. Keypad was flashing and showed part arm 1 or similar, flashing back light on and off, but no sound. I waited for about 10 seconds and the alarm triggered. Ideally I'd like a beep to remind the kids to disarm the...

Perfect, that all makes sense now. I've removed part 1 omit and it works as expected. I will try the door contact to see if that would work as an e/e still, or if it will alarm. Only slight issue is the keypad doesn't beep when the hallway pir sees me. Is there a way of having it beep at the...

Just to clarify in that case. Hallway is set as guard access currently (with double knock, it that makes any difference) which I have now added part 1 omit to. Will this mean when I select part omit, this hallway pir will then change from guard access to entey/exit and work how I'm hoping it...