Madrab's latest activity

Does the cylinder sit on a platform inside that cupboard? If there is then the valves may be in the void under the cylinder. Can you...

Cant really see what's going on there but if something that wasn't there and is now then no reason not to get him in to take a look.

The correct one would be the one I posted first of all but if you are DIYing then it may be easier just to get the same shallow trap...

Oh my 4 pages later and the OP still hasn't replied :ROFLMAO: :ROFLMAO: :ROFLMAO:

Apologies - the trap you have ( the white plastic u bend) is designed to be used in a specific waste water pipe set up. The correct one...

Looks like you have loads of space under that bath - unless that waste pipe runs to a hopper or an open gulley then you really want a...

I set it up today as described in my initial post and it seems to work. The manifold pump switches on when the CH water heats up and...

I guess you are trying to minimise or level out the tray with the rest of the floor space hence using a 5mm piece of ply? If it's going...

If you are going to use a bedding then you may be better off using a flexible tile adhesive rather than a mortar mix - mortar mixes on...

How old are the radiators? It can sometime be really difficult to stop a system blackening up, even after flushing, once older type rads...

What is it going down onto?

I think we all need to agree that there are pro-and cons for both combi and stored HW system types - if that wasn't the case then...

Apologies - I was half way through the reply and was still to add that using an inline blending valve allows the input flow temps to be...

You're right but the pipe it's connected to isn't the flow pipe into the pump - as suggested by @Hugh Jaleak , the bypass pipe from...

Looks to me like it's going into what was the Cylinder Primary return.