I need to fit a wood storage rack in the garage on a brick wall. The instructions are rubbish and the manufacturer is unwilling to suggest the correct bolts to use. The shelf bars are 25mm in depth and the holes looks about 6mm in size. The bolt need to support 50-75kgs.. however I’m not sure...
https://energylightbulbs.co.uk/outdoor-lighting/garden-spike-lights/12v-spikes/outdoor-garden-black-stainless-steel-12v-mr16-low-voltage-spike-light-zlc328b
I’ve attached a url link to the lights. I was looking at 12v as wanted to avoid armoured cabling issue that would come from running cable...
Hi Sunray, the image below is what has been installed. To confirm all light come on with switch, PIR are not keeping the lights on or turning all lights on, just the zone for the light required.
I’m looking to installing 12 outside LED lights along a path, these will be spiked in the ground, I preferred to use (low voltage) as small children running around.
I’m trying to calculate the driver required to power these, if the max 35 blub watts is used.
Wattage Max 35W
Bulb Base...
Just to say I purchased the screwfix option suggested by Sunray, wired as EFLImpudence diagram. Happy to confirm working exactly as described. Thank you all that contributed to the thread, really appreciate the support.
Ok thanks, I’ll stick with your one
https://www.eibabo.uk/schalk/switching-relay-ac-253...207v-10a-pulse-switch-rds-u1-eb15710284?fs=1376075477
any advice on wiring diagram welcome.
thanks
Thank you, are you able to provide a wire diagram for the one that you have suggested?
I also found the below, the 26.2 has two poles.
https://docs.rs-online.com/5c2a/0900766b816d4f15.pdf
Thank you, so this one would be suitable:
https://www.eibabo.uk/finder/installation-relay-230vac-switching-relay-for-sockets-13.31.8.230.4300-eb15709196?