DAZB's latest activity

Each situation will be different but here is the NHBC guidance for you...

Looks like an old gas wall heater flue and you can safely remove them and patch up the wall.

You will be fine without a lintel in this case as the wallplate will handle the span but if you want to be sure then screw a 4 X 2 on...

The edge of the eaves tile should be central under the first course so the lap is 50/50 aand the lap that you have is way off where it...

I would install a perforated land drain like this...

It could be the type that slide onto a plate mounted to the pan so you could try carefully and evenly trying to slide both hinges at...

It's called glazing beading and if you take a photo to a window firm or even spot a window fitter in your area and ask them for advice...

On the underside of the wooden support block is a small screw holding the pole, you can just see the small black dot in the photo, so...

There is a small area in the corner of the flashing and gutterback junction which looks like a potential problem as it looks like a hole...

There to support the roof due to the low pitch and, no doubt, quite a few tons of concrete tiles. The beam will be picked up and...

You don't mention if you have any airbricks but with any tanking work the key to it all working properly is ventilation and so you would...

If you can turn off the mains and move it then do it that way as you run the risk of unseating the whole thing if you try forcing it...

What kind of fence has your neighbour built as lap panels or other fence styles set between concrete posts can be lifted upwards and if...

Good luck...., but seriously, can you not suspend the tv from above on a pole or similar bracket system ? Something like this and there...

Without seeing it this is just a suggestion but you could cut it off lower down and use a Durgo valve which lets it vent but stops...